# USPE Tilting Autopsy Cart

Specification and configuration review | Revision C30-R1 | October 29, 2026.
This document accompanies original editable CAD studies; it is not an operating manual or fabrication release.

A mobile tilting-cart configuration for review. The illustrated examination pan and one-end manual-crank arrangement are requested options, not confirmed included equipment. Final supplied equipment is defined by the accepted quotation and approved model-specific drawings.

## Specification status

| Item | Current review position |
|---|---|
| Identity | USPE-AC-TILT; existing tilting-cart listing. |
| Illustrated configuration | Examination pan on a mobile frame, shown at one illustrative working slope. |
| Dimensions | Not released. The 82 × 31-inch CAD top is a modeling assumption only and must not be published as a product specification. |
| Tilt and elevation | Final mechanism, travel, end heights and permitted loaded movement remain unconfirmed. Tilting is not the same as coordinated full-height elevation. |
| Top and drainage | Top type, drain position, plug/hose and receiving sink are selected by written quotation. |
| Wheels and restraints | Caster diameter, brake functions, travel locks and retention provisions require configuration approval. |
| Load and utilities | No load rating, electrical requirement or utility schedule is established. |
| Compatibility | No receiving-sink, lift or tray compatibility is certified. |

The CAD drawing labels report the modeled envelope, including protruding hardware where shown. They do not resolve contradictory source dimensions or establish manufacturing tolerances.

## Model and configuration choices

- **USPE-AC-TILT**: Base configuration request.

Options are separate configuration requests, not automatically included equipment. Use the selected SKU when requesting a quotation; the accepted written quote defines the supplied scope and price.

## Matching CAD documents

- **Main view**: `../images/USPE-AC-TILT-hero-cad-c30.jpg`.
- **Detail view**: `../images/USPE-AC-TILT-detail-cad-c30.jpg`.
- **Three-view drawing**: `../drawings/USPE-AC-TILT-orthographic-cad-study.jpg`.
- **Editable assembly**: `../scenes/USPE-AC-TILT-cad-c30.blend`.

All views belong to the same illustrated assembly. Original CAD is not a production photograph or an as-built record.

## Configuration approval checklist

- Select the examination top and adjustment mechanism before establishing dimensions.
- Approve the pivot, drive, motion limits, guards and loaded adjustment rules.
- Confirm each end height and the independent drainage/transfer interfaces.

Record the selected SKU, orientation, included components, approved drawing revision and exclusions together. No capacities, certification, country of origin or universal compatibility claims are supplied by this review.

## Required installation and operating documents

- **Receiving and installation**: Obtain actual equipment mass, authorized handling points, floor/anchorage requirements, clearances and the selected utility schedule.
- **Operation**: Obtain validated model-specific controls, pre-use inspection, loading/transfer procedure, locks, permitted movement, stop/shutdown behavior and staff training requirements.
- **Cleaning and service**: Obtain compatible cleaning agents, concentrations, contact times, isolation procedure, maintenance intervals and a traceable parts schedule for the supplied assembly.
- **Acceptance**: Record serial number, purchase order, approved drawing, reviewer signature and facility acceptance before operational release.

These requirements are not substituted with generic instructions from a different model. Do not use this review document to install, operate, modify or certify equipment.

## Release record

Engineering approval: pending. Manufacturing approval: pending. Operating-manual release: pending.
Visual review of the CAD does not change those approval states.


## Draft drawing references

- [main cad study](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-ac-tilt-main-cad-study-20261029.jpg)
- [detail cad study](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-ac-tilt-detail-cad-study-20261029.jpg)
- [orthographic study](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-ac-tilt-orthographic-study-20261029.jpg)