# USPE PET Multi-User Necropsy Workstation

Specification and configuration review | Revision C30-R1 | October 29, 2026.
Original CAD accompanies this review; it is not a production photograph, fabrication drawing release or operating manual.

## Specification status

| Item | Current review position |
|---|---|
| Product identity | Existing multi-user workstation with separate island and wall layout requests. |
| Island request | USPE-VET-273-01: four-zone, two-sided configuration study with central wet-service area. |
| Wall request | USPE-VET-273-02: separate two-zone, one-sided configuration study. It is not the island drawing relabeled. |
| Dimensions | Island 66 × 70-inch and wall 66 × 35-inch deck envelopes are planning geometry. The wall footprint is not established by the supplied reference. |
| Workstation services | Sink arrangement, partitions, controls, fixtures and room interfaces require a selected layout. Lighting is not implied as included. |
| Performance and access | User count, reach, aisles, accessibility, exhaust balance and capture performance require project approval. |

All numerical CAD labels describe the saved modeled envelope only. Final materials, dimensions, tolerances, utilities and included equipment must be established by the accepted quotation and signed model-specific drawings.

## Model and configuration choices

- **USPE-VET-273-01**: Island layout review.
- **USPE-VET-273-02**: Wall layout review.

Use the selected SKU when requesting a quotation. The accepted written quote defines the supplied configuration, included components and price.

## Matching CAD documents

### USPE-VET-273-01

Illustrated configuration: four-zone island layout with central service area and opposing extraction grilles. This assembly does not establish other configurations or included options.

- **Main and detail views**: [Main CAD view](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-vet-273-01-main-cad-study-20261029.jpg) and [Component detail](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-vet-273-01-detail-cad-study-20261029.jpg).
- **Top, front and side drawing**: [Top, front and side study](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-vet-273-01-orthographic-study-20261029.jpg).
- **Editable assembly**: Included in the separate editable-source archive; not an approved manufacturing model.

### USPE-VET-273-02

Illustrated configuration: two-zone wall layout with central sink request and rear extraction grilles. This assembly does not establish other configurations or included options.

- **Main and detail views**: [Main CAD view](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-vet-273-02-main-cad-study-20261029.jpg) and [Component detail](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-vet-273-02-detail-cad-study-20261029.jpg).
- **Top, front and side drawing**: [Top, front and side study](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-vet-273-02-orthographic-study-20261029.jpg).
- **Editable assembly**: Included in the separate editable-source archive; not an approved manufacturing model.


## Configuration approval checklist

- Select island or wall before confirming the room footprint and user positions.
- Approve wet-service arrangement, work-zone divisions and separate service access.
- Engineer and commission ventilation for the selected layout; do not transfer results between layouts.

Review the exact selected configuration rather than a similar model. No capacity, certification, country-of-origin, infection-prevention or universal compatibility claim is established by these images.

## Required installation and operating documents

- **Receiving and installation**: Record actual mass, approved handling points, floor/wall/civil requirements, anchorage, clearances and the selected utility schedule.
- **Operation**: Provide validated controls, pre-use checks, procedure, safeguards, limits, stop/shutdown behavior and training for the actual assembly.
- **Cleaning and maintenance**: Provide compatible agents, concentrations, contact times, isolation, maintenance intervals and traceable replacement parts. Do not borrow these values from another product.
- **Acceptance**: Record SKU/configuration, serial number, purchase order, approved drawings, reviewer signatures and facility acceptance.

These are release requirements, not substitute operating instructions. Do not use this review to install, operate, modify or certify equipment.

## Release record

Engineering approval: pending. Manufacturing approval: pending. Operating-manual release: pending.
Visual approval alone does not change those states.


## Native record and document control

Product ID: 15444324647214. Native IDs, SKUs, stored prices and product options are preserved. This review does not change listing publication status.

| SKU | Native configuration | Variant ID |
|---|---|---|
| USPE-VET-273-01 | Island layout review | 67856522576174 |
| USPE-VET-273-02 | Wall layout review | 67856522608942 |

Engineering reviewer: ____________________  Date: __________

Approved drawing and selected configuration: ____________________

Facility acceptance: ____________________  Date: __________