# USPE Drop-In Ventilated Sink Station

USPE-WS-DI29. Specification and configuration review D2, October 29, 2026.

This is an unsigned design-review record, not a released operating manual or approved shop drawing. The illustrated configuration, native option records and unapproved technical fields must be reconciled before an order is released.

## Native product identity

- **Product ID:** 15446963749166
- **Handle:** uspe-drop-in-ventilated-sink-station
- **Purchase route:** Equipment quote
- **Preservation:** Native IDs, SKUs, variant options and stored prices were not changed by this documentation update.

| Native SKU | Configuration request | Variant ID |
|---|---|---|
| USPE-WS-DI29-01 | Base configuration | 67873695891758 |

## Current drawing references

- **Full product CAD view:** [Open current reviewed image](https://cdn.shopify.com/s/files/1/1745/7501/files/uspe-ws-di29-hero-cad-d2-20261029.jpg?v=1793284332)
- **Component detail:** [Open current reviewed image](https://cdn.shopify.com/s/files/1/1745/7501/files/uspe-ws-di29-detail-cad-d2-20261029.jpg?v=1793284331)
- **Front, side and top drawing:** [Open current reviewed image](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/uspe-ws-di29-orthographic-visibility-review-20261029.jpg)

These are original CAD studies, not production photographs or engineering approval. Overall dimensions on the drawing describe the modeled assembly; source literals and native planning targets do not establish a certified installation envelope, operating range or capacity.

## Native listing scope

The following is the current native listing text, retained for reconciliation rather than independently certified here.

The USPE-WS-DI29 combines a removable perforated work surface, rounded stainless basin and facility-exhaust connection in a drop-in sink station. It is intended for a coordinated laboratory or pathology countertop installation.

Construction and configuration

- Type 304 stainless steel construction.

- Rounded internal corners for cleaning access.

- Removable perforated work surface.

- Sink drain with strainer basket.

- 4-inch exhaust connection for a project-coordinated facility exhaust system.

Planning dimensions

USPE model
USPE-WS-DI29

Nominal body envelope
29 L × 25 W × 12 H in; optional fixture projections excluded

Inner basin
22 L × 18 W × 11¼ D in

Exhaust connection
4 in diameter

Available requests

Request a hot/cold mixing faucet, overflow drain, spray-rinse assembly, Type 316 stainless steel or a custom size and configuration. These are not included in the base configuration unless specified on the accepted quote.

Project coordination

Request a quote with your countertop layout, required work-surface arrangement and fixture selection. Countertop cutout, support, mounting, plumbing and exhaust requirements must be established on the approved project drawing before installation. No airflow, containment or exposure-control performance is established by this listing.

Original USPE CAD views show the illustrated design-review configuration. They are not production photographs or released fabrication, installation or operating drawings.

## Planning fields and qualifications

- **Model:** USPE-WS-DI29
- **Nominal body envelope:** 29 L × 25 W × 12 H in; fixture and drain projections excluded
- **Inner basin:** 22 L × 18 W × 11¼ D in
- **Exhaust connection:** 4 in diameter; facility exhaust coordination required
- **Material:** Type 304 stainless steel
- **Work surface:** Removable perforated stainless top
- **Base drain:** Sink drain with strainer basket
- **Optional requests:** Hot/cold faucet, overflow, rinse spray, Type 316 stainless steel, custom dimensions
- **Performance:** No airflow or containment rating established

## Document status

USPE USPE-WS-DI29: specification and configuration review D2, dated October 29, 2026. Current main/detail CAD views and the geometry-derived study drawing are available for the illustrated configuration. They do not establish that every native option or handedness has separate approved geometry.

NOT FOR OPERATION, INSTALLATION OR FABRICATION. This unsigned review does not establish safe working loads, utility conditions or operating instructions.

## Configuration record

Identify USPE-WS-DI29-01 and record the approved size, work surface, material and fixture selection on the accepted quote. The base illustration excludes optional faucet, overflow and spray-rinse assemblies.

## Before installation

Obtain the project-approved cutout, mounting, support, plumbing and exhaust drawings. Do not use the CAD study to cut a countertop, establish utility locations or set exhaust performance. Qualified project personnel must determine all installation and commissioning requirements.

## Drawing status

Original USPE CAD design study. Not a production photograph or released fabrication, installation or operating drawing. Illustrated perforations, corner radii, mounting hardware and connection details require project approval.

## Document control

Current review: D2, October 29, 2026. Earlier D0/D1 documents are historical review records and must not be treated as current instructions.

Engineering reviewer: ____________________  Date: __________

Approved configuration and drawing revision: ____________________

Facility acceptance: ____________________  Date: __________