Turbo Air ADR060AENC: 6,000 BTU Walk-In Cooler Evaporator Guide

Turbo Air ADR060AENC 6,000 BTU evaporator specifications, replacement checks, exact-model shopping guidance, freight terms and FAQs.
1 min read

Turbo Air ADR060AENC is a compact low-profile evaporator for commercial walk-in cooler applications. It is commonly searched by exact model number when a contractor, facility manager or purchaser is matching a replacement or project schedule.

ADR060AENC quick specifications

  • Model: ADR060AENC
  • Equipment type: walk-in cooler evaporator
  • Capacity: approximately 6,000 BTU
  • Electrical: 115V / 60Hz / 1Ph
  • Refrigerant family: R448A / R449A
  • Defrost: air defrost
  • Application: indoor walk-in refrigeration
  • Depth: 15.44 in.
  • Height: 16.19 in.

Shop the exact product: Turbo Air ADR060AENC Walk-In Cooler Evaporator.

Replacement checklist

  • Match the complete model number.
  • Verify the required BTU capacity under the actual box conditions.
  • Confirm refrigerant and metering components.
  • Confirm 115V single-phase power and controls.
  • Verify the condensing unit match and line set requirements.

For related ADR sizes, use the Turbo Air ADR evaporator guide.

Freight and purchasing notes

Turbo Air items do not ship free. Standard freight is $295 total for one or two Turbo Air items. Starting with the third Turbo Air item, add $125 per item. Additional accessorial charges can apply where required.

ADR060AENC FAQs

Is 6,000 BTU enough for my walk-in?

Not necessarily. Required capacity depends on box size, insulation, ambient conditions, product load, door openings and target temperature.

Can I replace another ADR model with ADR060AENC?

Do not assume interchangeability. Capacity and system requirements must be verified.

Where can I compare all Turbo Air models?

Use the Turbo Air evaporator and condensing unit collection and our master model selection guide.