Turbo Air LED090BENM: 9,000 BTU Electric-Defrost Evaporator Guide

Turbo Air LED090BENM exact-model guide covering 9,000 BTU capacity, 208-230V power, electric defrost, R448A/R449A system checks, freight and replacement planning.
1 min read

Turbo Air LED090BENM is a low-profile electric-defrost evaporator for professional walk-in refrigeration applications. Buyers searching this exact model should verify the complete system rather than treating nearby LED models as interchangeable.

LED090BENM specifications

  • Capacity: approximately 9,000 BTU
  • Electrical: 208-230V / 60Hz / 1Ph
  • Refrigerant family: R448A / R449A
  • Defrost: electric defrost
  • Application: indoor walk-in refrigeration/freezer application
  • Depth: 15.44 in.
  • Height: 16.19 in.

Shop the exact listing: Turbo Air LED090BENM.

Replacement and compatibility checks

Confirm design temperature, calculated load, refrigerant, voltage, defrost controls, metering device, line sizing and paired condensing equipment. Electric-defrost requirements are especially important when replacing an existing unit cooler.

Compare LED evaporators

Use the Turbo Air LED model and replacement guide or browse the complete refrigeration collection.

Freight

Turbo Air items do not ship free. Standard freight is $295 total for one or two Turbo Air items; beginning with item three, add $125 for each additional Turbo Air item. Additional accessorial charges can apply.

LED090BENM FAQ

Is LED090BENM an air-defrost model?

No. The live specification identifies it as an electric-defrost evaporator.

Can I replace a different LED model with it?

Do not assume so. Capacity, electrical, defrost and refrigeration-system requirements must match.

See the Turbo Air master model guide for broader selection guidance.