Roll-in body coolers
Bodies roll in on the cot at working height. One person can load safely, so there is no lift to buy and no second staff member needed.
Shop roll-in coolers →Resources
Affordable Mortuary and Body Coolers
Affordable mortuary and body coolers: roll-in, three-body, vault, side-load, upright and walk-in body storage solutions, factory direct with financing.
Affordable Mortuary and Body Coolers
An affordable body cooler should still be the right cooler. The lowest total cost comes from buying the right capacity once, choosing a format your staff can load safely, and running a refrigeration system sized to the box. We sell direct with published prices, so you can compare body storage options side by side and pick the most cost-effective one for your facility.
Body storage solutions by style
Three-body morgue coolers
Funeral homes buy this size most. Standard, bariatric, side-load and triple-wide roll-in versions are available.
Shop 3-body coolers →Upright body coolers
Tiered storage gives the most capacity per square foot. Sizes run from 2 to 12 bodies.
Shop upright coolers →Side-load coolers
Bodies load from the long side when the room is wide but not deep.
View the side-load cooler →Vault morgue coolers
A separate door and slide-out tray for every body, built for hospital and pathology suites.
Shop vault coolers →Walk-in body coolers
For high volume, the lowest cost per body position, with modular panels that can grow later.
Shop walk-in coolers →Where the real savings are
- Buy for peak capacity once instead of adding a second unit
- Choose roll-in to avoid buying a lift for small volumes
- Use a walk-in once you pass about 8 bodies for a lower cost per position
- Add an insulated floor where it lowers run time
- Size refrigeration to the box, not the cheapest compressor
- Order racks, trays and freight together on one shipment
Affordable coolers in our lineup
2 Body Standard Roll-In Mortuary CoolerCot-level loading for smaller facilities
3 Body Standard Mortuary CoolerThree-tier upright storage
3 Body Triple-Wide Roll-In CoolerThree bodies side by side at cot height
4 Body Bariatric Mortuary CoolerWider tiers for larger decedents
6 Body Dual-Door Mortuary CoolerTwo compartments, one footprint
12 Body Triple-Door Mortuary CoolerThree doors, three 4-tier racks included
10x10 Walk-In Mortuary CoolerRoom for three 4-tier racks
10x16 Walk-In Mortuary CoolerExpansion room for high-volume work
Equipment to go with your cooler
Mortuary stretchers
Removal cots, bariatric cots and cot trays for first-call and transfer work.
Shop mortuary stretchers →Church trucks
Casket carriages, folding church trucks and drapes for chapel and graveside service.
Shop church trucks →Embalming tables
Hydraulic, bariatric and folding dressing tables for the preparation room.
Shop embalming tables →Embalming stations
Sink stations, flushing stations and water control units for a complete prep room.
Shop embalming stations →Body and casket lifts
Scissor lifts, powered lifts and strap lifters that remove the manual lift from every transfer.
Shop body and casket lifts →Storage racks
End-load, side-load, multi-directional and cantilever racks with matching trays and boards.
Shop storage racks →Racks, trays and lifts for your cooler
Storage capacity is set by the rack and tray system inside the cooler, and safe handling depends on the lift that serves it. These are the rack, tray and lift models buyers pair with our coolers most often. See the full mortuary lifts, racking systems and storage trays collection for every size and configuration.
4-Tier End-Loading Mortuary RackFour bodies per rack, loaded from the foot end
4-Tier Side-Loading Mortuary Rack31" x 85" footprint, 21" first tier
4-Tier Cantilever Mortuary RackOpen-front arms, mobile or stationary
TITAN 23" Stainless Steel Body Tray78" long, 18 gauge, hand slots
HD Mortuary Plastic Storage Board23.5" x 76" HDPE barrier board
Hydraulic Crematory Scissor Lift1,000 lb, foot-pump hydraulic
Low Profile Powered Crematory Lift12" low load height, 12V battery
1,000 lb Casket & Body LifterStrap lifter, 31" to 72" boom
Frequently asked questions
What is the most affordable mortuary cooler?
The 2-body coolers are the lowest-cost entry point. If you want to avoid lifting with a small team, a 2-body roll-in is often the best value because no lift is needed.
Are affordable body coolers lower quality?
Not here. The price difference between models comes from capacity, format and refrigeration, not from cutting corners on the enclosure.
Can I finance a body cooler?
Financing is available through Shop Pay, including 0% offers with approved credit.
How is freight priced?
Freight is calculated at checkout from your delivery ZIP code and the options you choose, such as liftgate delivery.
Which body cooler is best for a hospital?
Hospitals usually compare vault coolers with individual doors and multi-body uprights. Medical examiner offices often move to a walk-in room with racks.
Talk to the equipment team
Send your room size, door opening, capacity and receiving details. We will match the cooler, racks and lift and quote freight to your dock.
