Temporary Morgue Storage

Temporary Morgue Storage (TMS) by MyMortuaryCooler.com is the U.S.-built solution for disaster morgue planning, surge body storage, and short-term morgue storage when normal capacity runs out. From a single overflow event to a full mass-fatality incident, TMS supplies refrigerated walk-in morgue coolers, upright mortuary coolers, high-density mortuary racks and body trays, and complete natural disaster morgue planning support — shipped factory-direct from Johnson City, Tennessee, to all 50 states.

When You Need Temporary Morgue Storage

Temporary morgue storage exists for the moments when permanent capacity is overwhelmed. TMS is built around the real triggers emergency managers, hospitals, medical examiners, coroners, and funeral homes plan for:

• Natural disaster morgue planning — hurricanes, floods, wildfires, tornadoes, earthquakes, and winter storms that produce sudden decedent surge.
• Mass-fatality incidents — transportation, industrial, and public-safety events requiring rapid body-storage scaling.
• Pandemic and public-health surge — sustained overflow beyond hospital and ME cooler capacity.
• Medical examiner / coroner overflow — short-term morgue storage during caseload spikes or facility renovation.
• Hospital and health-system surge — temporary body storage staged on-site or at an alternate care site.
• DMORT, FEMA, and government continuity — pre-positioned, owned surge assets for emergency morgue planning.

Top Walk-In Morgue Coolers for Surge & Disaster Storage

Modular, NSF/UL-grade walk-in mortuary coolers are the backbone of large-scale temporary morgue storage — high-density, rack-ready, and scalable from a few bodies to mass-fatality surge.

View all walk-in mortuary coolers →

Upright Mortuary Coolers for Fast-Deploy Storage

When floor space or freight access is limited, self-contained upright mortuary coolers deliver plug-in temporary morgue storage that ships fast and stages anywhere.

View all upright mortuary coolers →

A U.S.-Built Alternative to Flexmort® & Mopec® Guardian™

Agencies building a disaster morgue plan often compare portable systems such as Flexmort® cooling units and the Mopec® Guardian™ line. Temporary Morgue Storage by MyMortuaryCooler.com is a different model: instead of rental cold-plates or single-purpose portable kits, TMS gives you owned, NSF/UL-grade refrigerated walk-in and upright morgue coolers, high-density racks, and body trays you keep on hand for the next event — sized from a few decedents to full mass-fatality surge, built in the U.S.A., shipped factory-direct, and backed by purchase-order, FEMA, and DMORT procurement support. Buy once, own the capacity, and avoid recurring rental cycles or single-incident disposables.

Flexmort® is a registered trademark of its owner; Mopec® and Guardian™ are trademarks of Mopec, Inc. These names are referenced here for factual comparison only. American Mortuary Coolers / Temporary Morgue Storage is independent and is not affiliated with, endorsed by, or sponsored by these companies.

Morgue Planning & Disaster Morgue Planning

Effective morgue planning answers four questions before an incident: how many decedents could need storage, where surge units will be staged, how power and freight reach the site, and who signs the purchase order. TMS helps emergency managers and facility planners convert those answers into a concrete equipment scope — walk-in vs. upright capacity, refrigeration vs. freezer holding, rack and body-tray counts, and delivery timelines — so the plan is shovel-ready when an event hits. Whether you are writing a county natural disaster morgue planning annex or pre-positioning short-term morgue storage for a hospital system, the goal is the same: owned, scalable, compliant body-storage capacity that deploys fast.

Temporary Morgue Storage by State

TMS supports all 50 states with temporary morgue storage, surge body coolers, and disaster morgue planning. Select your state for local cities, regions, and emergency-management context:

Temporary Morgue Storage FAQs

What is temporary morgue storage?

Temporary morgue storage is refrigerated body-storage capacity — walk-in coolers, upright coolers, racks, and trays — deployed for short-term or surge needs when permanent morgue capacity is exceeded by a disaster, mass-fatality event, pandemic, or caseload spike.

How fast can surge morgue coolers ship?

Upright coolers stage fastest; modular walk-in coolers scale highest. Call the 24/7 line at 1-888-792-9315 for current lead times and emergency freight.

Is this an alternative to Flexmort® or Mopec® Guardian™ systems?

Yes — TMS provides owned, U.S.-built refrigerated walk-in and upright morgue coolers and racks as an alternative to portable cold-plate or rental systems, with purchase-order, FEMA, and DMORT support.

Do you support DMORT, FEMA, and government buyers?

Yes. TMS supports purchase orders, net terms, and government / emergency-management procurement nationwide.

Which states do you cover?

All 50 states, with state-level pages covering local cities, regions, and emergency-management context.

Related: MortuaryGlide™ Rail System · Morgue Coolers · Walk-In Mortuary Coolers · Morgue Storage Systems · Medical Examiner Equipment