Mortuary Equipment Planning Guides
Why Mortuary Cooler Monitoring Is Becoming Standard in 2026
Boards, hospital partners, insurers, and county contracts increasingly expect continuous cooler temperature records. How monitoring became a compliance expectation —...
2 min read
2026
How to Compare Mortuary Cooler Manufacturers: The 2026 Buyer Checklist
Seven factors separate mortuary cooler vendors: capacity, customization, freight, financing, parts, lead times, and support. The 2026 checklist with vendor-by-vendor...
2 min read
2026
The Dixell XR40CH Controller: Setting and Reading Your Mortuary Cooler Temperature
How to read the set-point, change temperature, run a manual defrost, and interpret alarms on the Dixell XR40CH controller used...
1 min read
Dixell XR40CH
Where to Place a Packaged Refrigeration Unit on a Mortuary Cooler (And Where Never To)
Placement rules for top-mount packaged refrigeration — clearances, airflow, structural support, and the one location the manual forbids: over doors.
2 min read
evaporator
Re-Evaporation Pans vs External Drains: How Modern Mortuary Coolers Handle Condensate
How the hot-gas re-evaporation pan works, when it's enough, and when your mortuary cooler needs an external drain or condensate...
2 min read
condensate
Mortuary Cooler Troubleshooting: Compressor, Temperature, and Ice Problems Solved
Field troubleshooting for packaged mortuary cooler refrigeration — compressor won't run, room too warm, ice in the drain pan, and...
1 min read
compressor
Why Your Mortuary Cooler Warranty Depends on Proper Installation
The installation conditions that keep — or void — your refrigeration warranty: voltage tolerance, factory wiring, drainage, placement, and licensed...
1 min read
installation
Mortuary Cooler Electrical Requirements: Why 115V Plug-and-Play Beats Hard-Wiring
Dedicated circuits, NEMA 5-20R plugs, and the electrical rules that keep your mortuary cooler warranty intact — no extension cords,...
1 min read
115V
P1 vs P2 vs P3 Cabinets: Heatcraft PRO³ Packaged Refrigeration Sizes Explained
The three Heatcraft PRO³ cabinet classes — P1, P2, P3 — and how condensate handling, panel openings, and capacity differ...
1 min read
cooler sizing
High Humidity and Mortuary Coolers: Managing Condensate in Southern Climates
Why Gulf-region and southern facilities need a condensate drainage plan for mortuary coolers — overflow risk, condensate pumps, and humidity...
2 min read
condensate
A2L Refrigerants Explained: What 2026 Refrigerant Rules Mean for Funeral Homes and Morgues
New Freon regulations pushed mortuary cooler refrigeration to low-GWP A2L refrigerants in 2026. What changed, what's safe, and what buyers...
1 min read
2026 refrigerant regulations
Heatcraft PRO³ Startup Checklist: 9 Steps Before You Power On Your Mortuary Cooler
A nine-step startup checklist for 2026 Heatcraft PRO³ packaged refrigeration on mortuary coolers — drainage, P-trap seal, electrical, and controller...
2 min read
Heatcraft PRO3
Do Mortuary Coolers Need a Drain Line? Condensate Drainage Explained
When a mortuary cooler needs an external condensate drain, what the P1/P2/P3 cabinet differences mean, and who is responsible for...
2 min read
condensate drainage
Self Contained Refrigeration Units for Mortuary Coolers: The Complete 2026 Guide
What a self contained refrigeration unit is, how the Heatcraft PRO³ packaged system works on upright mortuary coolers, and what...
2 min read
Heatcraft PRO3
The Complete Guide to Mortuary Equipment Monitoring with HALO
A comprehensive guide to mortuary equipment monitoring with HALO Smart Monitoring. Learn why real-time monitoring matters, how HALO works for...
4 min read
Equipment Monitoring







Program snapshots shown for reference; current status and scores may change.