2-Tier Cantilever Mortuary Rack

The 2-Tier Cantilever Mortuary Rack gives a smaller funeral home, prep room or walk-in cooler two body positions in a frame just 29 7/8″ tall. It fits low ceilings, compact coolers and holding areas where a taller rack won't, and it uses the same 42″ × 32″ footprint, open loading face and welded, powder-coated steel frame as our 3-, 4- and 5-tier racks.

• Two positions, open front: the arm reaches out from one side, so trays and boards load straight in with no front posts in the way.
• Leveling feet or casters: choose leveling feet (Model# 2T-C-1) for a fixed position or four 6″ plate-mounted casters (Model# 2T-C-2) to roll the rack out for cleaning.
• Works with a low-profile lift: the base level sits 7 1/2″ from the floor on leveling feet. Pair it with the TITAN 1030-LPL Low Profile Mortuary Lift.
• Room to grow: add a 3-tier, 4-tier or 5-tier cantilever rack as your caseload grows.

Rack warranty

American Mortuary Equipment mortuary racks are warranted part by part, with the longest term on the welded structure that carries each tier.

Loads must stay within the rated capacity per tier. Clean painted surfaces with a mild detergent; chlorine bleach, solvents and abrasive pads void the finish warranty, and chips from impact are not covered. Minor cosmetic marks that do not affect fit or function are not defects. On stainless steel racks the welded stainless frame carries the same 15-year structural warranty, and surface scratches or discoloration are not covered.

Coverage applies to defects in materials and workmanship under normal use, starting on the date of delivery to the original end user unless a different start is stated above. It is not transferable, and freight to and from our facility is not covered. Claims are made in writing with the order number, photos and a short description; claim handling follows the Warranty Policy (WR-1.0).

See every American Mortuary Equipment warranty in one place

Compare rack layouts and plan tray transfers

Compare the AME side-load roller rack for roller-deck storage, the USPE adjustable cantilever rack for tier and base choices, or the USPE truck rack with belts for an approved transport installation.

Match your mortuary lift to every usable tier, selected tray and rated load. Low rack positions can fall below a lift’s minimum transfer height. Compare trays and storage boards; barrier boards are not weight-bearing lifting supports. Custom rack sizes and build configurations are available by quotation.

Real product photos show representative configurations; confirm the selected leveling-foot or caster base before ordering.