AME-DD2000-XLC Double-Deck Mortuary Transport System | Cargo Van

Double-Deck System for Full-Size Cargo Vans | Cots, Cremation Containers & Caskets

The AME-DD2000-XLC is the industry's first double-deck system engineered to accommodate both standard and oversized cots side-by-side. Designed for full-size cargo vans, it doubles your transport capacity — allowing a single operator to safely move four cots, four cremation containers, two air trays, or two caskets per run.

Key Features

• Fits Standard & Oversized Cots Side-by-Side — 50.5" upper deck and 51.8" lower deck width accommodate today's larger cot sizes simultaneously.
• Powered Upper Deck with Safety Latch — Raises and lowers in seconds via control switch at deck entry. Integrated safety latch locks deck in place if actuators fail.
• 600 lb. Upper Deck Capacity — Reinforced frame with simplified lifting geometry built for daily professional use.
• 4 Interchangeable Bier Pin Plates — 2 on each deck, 10-hole plates for ultimate securing flexibility.
• 8 Nylon Casket Rollers — 4 per deck for easier loading and unloading of caskets, air trays, and cremation containers.
• Recessed Solid Cast Aluminum Cot Cups — Prevent cots from shifting during transport on both decks.
• Aluminum Deck with Glide Strips — Protects the vehicle floor and reduces friction during loading.
• High-Impact Fold-Down Bumper Ramp — Protects the rear of the vehicle and assists in loading and unloading.
• User-Friendly Control Switch — Located at the deck's entry point for easy one-handed operation.
• 12-Volt Compatible | 750 lbs. | Min. 140" Wheelbase

Vehicle Compatibility & Product Codes

Specifications

Note: Double-deck installation requires a van partition bulkhead. Vehicles with rear A/C or dual rear-wheel packages will restrict installation.

EV Warning: Must be professionally installed by a trained technician in Electric Vehicles. Higher voltage EV batteries — improper drilling may cause serious injury or death.

Compatible Accessories

• Bier Pin Kit — Additional interchangeable bier pins for varied casket and container sizes.
• Roller Kit — Extra casket rollers for improved loading and unloading.
• Cargo Kit — Supplemental cargo management for securing additional load types.

Also Consider

• AME-DD4000 — 4-Casket Double-Deck Transporter (Sprinter, Nissan NV, ProMaster EXT)
• AME-DD-EX2 — Double-Deck for Mid-Size Vans (Mercedes Metris)
• AME-SS150XLC — Oversize Single-Deck: Standard + Oversized Cots Side-by-Side
• AME-SS150XL — Single-Deck with Casket Rollers (22+ Vehicle Fits)
• AME-SS150 — Single-Deck System (Widest Vehicle Compatibility)
• Shop All AME Mortuary Vehicle Deck Systems
• First Call Mortuary Cots & Stretchers
• Mortuary Cot & Deck Compatibility Center — Verified Fitment

Frequently Asked Questions

What can the DD2000-XLC carry?
Four cots, four cremation containers, two air trays, or two caskets per run — and it fits standard and oversized cots side-by-side.

How many vehicles does it fit?
18 full-size cargo van configurations including Ford Transit, Chevrolet Express, GMC Savana, Mercedes Sprinter, RAM ProMaster, Nissan NV, and Ford E-Series.

What is the minimum wheelbase?
140 inches. A van partition bulkhead and bolted-down installation are required.

What is the lead time?
Made to order, typically 6–8 weeks. Confirm vehicle fitment before ordering.

Deck System Guides

New to van deck systems? These planning guides cover fitment, capacity, loading, and installation:

• Mortuary Vehicle Deck Systems: The Complete Buyer's Guide
• How to Choose a Mortuary Van Deck System by Vehicle
• Cremation Transport: Moving Multiple Containers Safely
• High-Volume Funeral Home Logistics: Doubling Van Capacity
• First Call Removal Vehicles: Maximizing Capacity
• How to Measure Your Vehicle for a Deck System & Cot

Availability: Made to order — please allow 6–8 weeks for production and fulfillment. Contact us to confirm vehicle fitment before ordering.