Selling fast!
Get yours while you can.
-
2BXWU-RH-STD-KIT
2 Body Extra Wide Upright Mortuary Cooler
Regular price $8,294.26Sale price $8,294.26 Regular priceUnit price per$8,625.99Shipping calculated at checkout.β WARRANTY NOTICE β NO EXTENSION CORDS
This unit must plug directly into its own dedicated 115V, 20-amp circuit (NEMA 5-20R receptacle). Use of any extension cord, power strip, or plug adapter immediately voids the warranty and can damage the compressor. Details: Warranty Policy.
Over
21k mortuary products sold since 2009
Up to 4% offBariatric-capable 2-cadaver upright β bariatric-width cabinet, rack-loading workflow, self-contained 115V refrigeration, built in Johnson City, Tennessee.
At a glance
- 2-body capacity β bariatric-width cabinet
- Upright rack-loading design
- Modular insulated cabinet, 4β³ urethane core
- Self-contained refrigeration β 115V single-phase, NEMA 5-20R plug
- NSF, UL, ASTM E84 certified
- 15-year structural panel warranty Β· made in the USA
Specifications
Body capacity 2 cadavers, bariatric-width clearance Load configuration Upright rack-loading Cabinet construction Modular insulated, 4β³ urethane core Refrigeration Self-contained β included Operating range 34β40Β°F body holding Required air clearance 1β³β1.5β³ around entire cabinet Β· 16β³ above compressor β see VC-1.1 Voltage 115V / 1-phase / 60 Hz Β· 4.6 A Β· NEMA 5-20R plug Certifications NSF, UL, ASTM E84 Class A, DOE/EPA EISA 2007, Prop 65 Warranty 15-year panel structural β see Warranty Policy (WR-1.0) Country of origin United States β Johnson City, Tennessee Manufacturer American Mortuary Coolers Electrical & Compressor Specifications
Amperage4.6 A115V Β· 1-phase Β· 60 HzPlug TypeNEMA 5-20RCord & plug suppliedSupply voltage 115V / 1-phase / 60 Hz Unit amps (running) 4.6 A Minimum circuit ampacity (MCA) 15.0 A Max overcurrent protection (MOPD) 15 A fuse / breaker Cord & plug Supplied from factory β NEMA 5-20R Compressor system capacity 2,900 BTU/h @ 95Β°F ambient Β· 35Β°F box Refrigerant R-290 (low-GWP hydrocarbon) Defrost Air defrost Evaporator fan motor 2-speed EC Β· 250 CFM Efficiency (AWEF) 5.61 β meets DOE minimum Refrigeration unit size 20.75β³ H Γ 28.56β³ W Γ 29.75β³ D Β· 115 lb package Compressor service clearance 16β³ minimum above and around the condensing unit Listing UL listed β US & Canada Refrigeration platform Heatcraft Climate Control PROΒ³ β factory electrical spec sheet (PT0032MANAPNA) Plug-and-play on a dedicated 115V / 20-amp circuit β no hard-wiring required. A stamped electrical schedule ships with every quote.
Required Air Clearance & Owner Maintenance β Policy VC-1.1
Standard on all AMC drop-in refrigeration systems. These are conditions of warranty coverage, not recommendations.
- 1β³β1.5β³ minimum air gap around the entire cabinet β all sides and rear, maintained permanently.
- 16β³ minimum unobstructed clearance above and around the compressor / condensing unit for airflow, heat rejection, and service access.
- No shelving, cabinetry, soffits, dropped ceilings, boxed enclosures, adjacent equipment, or stored goods may encroach on either envelope.
Owner Maintenance Responsibility
The customer is responsible for ongoing maintenance of the compressor and refrigeration system, including annual professional service as needed β coil cleaning, drain-line clearing, gasket inspection, and verification of refrigerant charge and temperature performance. Routine maintenance, consumables, labor, and service calls are not warranty items.
Published exterior dimensions do not include required clearance β add it when planning your space. Full terms: Ventilation & Clearance Policy (VC-1.1) Β· Warranty Policy (WR-1.0)
Important β Read Before Startup: 2026 Packaged Refrigeration System
Due to the changing refrigerant models under new Freon regulations and updated guidelines, it is critical that you completely read all startup instructions before using your packaged refrigeration system. Please be sure you understand your startup settings and the proper overflow and humidity drainage ports, which require hose adapters.
Condensation Drain Requirement
All 2026 Heatcraft compressors require a drain hose attached to the drain port for condensation, to maximize energy efficiency. Connect the supplied drain line to the drain port before startup.
External Drain Connection
In high-humidity environments or during continuous heavy run-times, the unit may experience overflow. To prevent this, the indoor unit is equipped with a 3/4β³ NPT external drain connection that can be routed to an external drain line or a field-supplied condensate pump.
Internal Re-Evaporation
Indoor PROΒ³ models include a hot-gas re-evaporation pan beneath the compressor, which uses hot refrigerant gas to evaporate condensation naturally during normal operation.
2026 and Forward β Heatcraft PROΒ³
2026 and later packaged Heatcraft PROΒ³ systems include many new features made possible by an extremely high-efficiency process. Reviewing the startup documentation ensures these systems perform as designed.
American Mortuary Coolers accepts no liability or responsibility for a customerβs failure to properly start up the new AW2 fully packaged, plug-in refrigeration units. If you have specific questions regarding functions and operations, please reach out prior to ordering.
Full startup manuals and tech bulletins: Packaged Refrigeration Manuals & Startup Guide
Questions before you order? Call 1-888-792-9315 or email cool@mymortuarycooler.com.
Upright vs. roll-in vs. shell & cot compatibility
This product is the upright rack-loading bariatric 2-body, built for funeral homes and morgues handling occasional-to-recurring bariatric cases that donβt want the floor-area commitment of a walk-in or the cot-tied workflow of a roll-in. Compare to:
- 2 Body Extra Wide Roll-In β same capacity but cot-direct roll-in (case stays on cot inside the cooler)
- 2 Body Extra Wide Upright β Shell Only β same cabinet, no refrigeration package (for facilities supplying their own)
- 2 Body Standard Width β standard case clearance, no bariatric width
Cot and tray compatibility: pairs with the 1000E Bariatric Cot and Double Width Removal Tray. For vertical case transfer, the 1,000-lb Hydraulic Scissor Lift.
Background: bariatric buyerβs guide. Catalogs: bariatric coolers Β· extra-wide coolers.
Financing, shipping & lead time
- 0% financing at checkout β Shop Pay Installments for qualified buyers
- 1% back on every Shop Pay purchase
- Extended financing on orders over $5,000 β apply here
- Section 179 in-year tax treatment β guidance here
Most orders ship within 2 business days from Tennessee. See delivery times by region.
Regional desks: Southeast Β· Midwest Β· Northeast Β· Southwest Β· Rocky Mountain Β· Pacific Β· Canada.
Frequently asked questions
How is this different from the 2-Body Extra Wide Roll-In?
This is an upright rack-loading cabinet β bodies are transferred onto an internal rack. The roll-in version keeps the case on the cot inside the cooler.
What electrical supply does it need?
A dedicated 115V / 20-amp circuit. The unit draws 4.6 running amps and ships with a NEMA 5-20R cord and plug β plug-and-play, no hard-wiring. See the Electrical & Compressor Specifications above.
How much clearance does it need around it?
A minimum 1β³ to 1.5β³ air gap around the entire cabinet, plus 16β³ of unobstructed clearance above the compressor. This is standard on all drop-in refrigeration systems and is a condition of warranty coverage β see the Ventilation & Clearance Policy (VC-1.1).
Who is responsible for maintaining the compressor?
The owner. The customer is responsible for ongoing maintenance of the compressor and refrigeration system, including annual professional service as needed. Routine maintenance, cleaning, consumables, and service labor are not warranty items.
Do I need a drain line?
In high-humidity or high-temperature environments, yes β attach a hose to the external drain connection and route to a drainage source. See the packaged refrigeration manuals page.
What temperature does it maintain?
34β40Β°F body holding standard.
Does the 1000E Bariatric cot fit through the door?
Yes. Extra-wide cabinet clearance accommodates the 1000E case envelope.
Whatβs the lead time?
2 business days for in-stock configurations.
Can it be financed?
Yes. 0% Shop Pay Installments. Qualifies for extended financing.
Where is it made?
Johnson City, Tennessee. American Mortuary Coolers, family-owned since 2009, A+ Rated by the Better Business Bureau.
Direct procurement: 1-888-792-9315 Β· po@mymortuarycooler.com Β· request catalog Β· dealer inquiries
Return Policy: All coolers, racks, lifts, and other products are non-returnable β no exceptions. All refrigeration products purchased on or after 1/1/2026 are 100% non-returnable under any circumstances. Please review our full Return Policy before purchasing.
Choose how to pay
$8,294.26$8,625.99Save $331.73Pay in full$8,294.26Best price - rebate appliedFor businessesLease · TimePaymentLease financing availableTax-deductible, keeps your credit freeApply for financingEstimates are for qualified buyers with approved credit (WAC) and reflect the equipment price only. Shipping, freight, and applicable taxes are not included and will increase your total and payments. Final amounts are set at checkout or on your quote.
Government and institutional buyers: request a PO quote.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
