Are American Mortuary Coolers 2-body units made in the USA?

Yes. Every American Mortuary Coolers unit is manufactured in Johnson City, Tennessee. American Mortuary Coolers is the only factory-direct mortuary cooler manufacturer in the United States, with no imported components or third-party distributors.

What electrical requirements does a 2-body plug-and-play mortuary cooler need?

American Mortuary Coolers 2-body units connect to standard electrical circuits. No special wiring, dedicated refrigeration lines, or HVAC contractor is required. The unit arrives fully assembled and charged with refrigerant.

How does White-Glove Installation work for a 2-body cooler?

FREE Level 2 White-Glove Installation on qualifying orders includes delivery to your preparation room, positioning, leveling, electrical connection verification, and temperature calibration to 34°F–38°F before the installation team departs.

Can I get a 2-body roll-in cooler from American Mortuary Coolers?

Yes. Roll-in configurations at the 2-body capacity tier are available, allowing mortuary cots to roll directly into the cooler — eliminating the manual body transfer step and reducing staff injury risk.

Best 2-Body Mortuary Cooler for Funeral Homes — USA-Made, Plug-and-Play

May 31, 2026 3 min read

When a small funeral home needs reliable, CDC-compliant body storage without the complexity of a walk-in build-out, a USA-made 2-body mortuary cooler is the clear answer. American Mortuary Coolers manufactures every unit in Johnson City, Tennessee — factory-direct, no distributors, no imported components — delivering quality and accountability that overseas alternatives simply cannot match.

Why USA-Made Matters for Mortuary Coolers

Imported refrigeration units may advertise comparable specs, but the service reality differs dramatically. When a compressor fails at 2:00 AM before a morning service, a domestic manufacturer's direct support line makes the difference. American Mortuary Coolers' service team is reachable at service@mymortuarycooler.com and our technical team can dispatch parts from Johnson City, Tennessee without the 6–8 week overseas shipping delays common with imported units. Our warranty and service policy reflects that direct manufacturer commitment.

What "Plug-and-Play" Actually Means

True plug-and-play operation means the cooler arrives fully assembled, charged with refrigerant, and ready for a standard electrical connection. No panel installation, no refrigeration line sets, no HVAC contractor. The FREE Level 2 White-Glove Installation included with qualifying orders handles delivery into your preparation room, positioning, leveling, and temperature verification to 34°F–38°F before our team departs. This is body storage operational in hours, not weeks.

Key Features of American Mortuary Coolers 2-Body Units

Commercial-Grade Refrigeration

Our 2-body units use the same commercial-grade compressor architecture as our larger capacity units — not residential-grade components scaled down. The compressor is rated for ambient environments up to 95°F, ensuring stable CDC-compliant temperatures even in non-air-conditioned preparation rooms during summer months.

Stainless Steel Throughout

Exterior panels, interior walls, and tray slides are all stainless steel — meeting NSF sanitation standards and withstanding chemical disinfection protocols between cases. No plastic interior surfaces that absorb odors or degrade with repeated sanitization cycles.

Full-Extension Trays

Each tray extends fully out of the unit for body placement and retrieval — eliminating the awkward partial-extension that causes back strain and body positioning errors with lesser designs. The slides are rated for standard adult decedent weights and lubricated for smooth, quiet operation.

2-Body vs. Larger Configurations: Quick Decision Guide

If your facility handles fewer than 75 cases per year, a 2-body cooler matches your operational footprint. Between 75 and 150 cases, a 3-body mortuary cooler provides the buffer needed during busy periods. Above 150 cases annually, evaluate a 4-body or larger unit. See the complete overview in our Body Cooler Buying Guide 2026.

Roll-In vs. Standard 2-Body

Standard 2-body coolers use front-loading trays for body storage. If your facility regularly receives bariatric decedents or wants to eliminate the manual transfer step entirely, a roll-in mortuary cooler at the 2-body capacity tier allows the mortuary cot to roll directly into the cooler. This is also covered in our post on the 2-Body Roll-In Mortuary Cooler.

Section 179 Tax Advantage

Even a compact 2-body cooler qualifies for the IRS Section 179 deduction — your funeral home can expense the full purchase price in year one, up to the $1,250,000 deduction limit. This effectively reduces the net cost of the cooler by your marginal tax rate. Combined with 24-hour financing approvals from American Mortuary Coolers, getting a quality unit in place is financially straightforward. Details at our financing page.

Browse Current In-Stock 2-Body Units

American Mortuary Coolers maintains in-stock inventory for immediate shipment — many 2-body units ship within 48 hours of order confirmation. Check the 2-body cooler collection for current availability and the ready-to-ship catalog for units available for immediate delivery. Call 1-888-792-9315 to confirm stock or configure a custom unit. American Mortuary Coolers has served 7,500+ customers since 2009 with an A+ BBB rating — factory-direct, Tennessee-built, and standing behind every unit we ship.